iDash
by 14Point7
A virtual dashboard on your phone, tablet, or PC. iDash leverages the latest web and Wi-Fi technology to allow your engine to speak directly to you through your web browser. iDash virtual dashboards are touch enabled - adding and changing gauges, plotting, graphing, and data-logging is a mere touch away.
Optimised for iPhone, iPad, Android, BlackBerry, Windows, and Linux. iDash not only speaks all those languages, but can also speak them all at once. Create your own custom virtual dashboard on just one device, or across several devices simultaneously.
Have the latest phone or tablet? Run the modern HTML5 or Adobe Flash interface for a graphically rich experience.
Have an early generation phone or tablet? Run our efficient HTML interface for a streamlined experience.
Want a unique virtual dashboard that fits with your interior? Upload custom dashboards of your own design, if you can make a webpage you can make your own custom dashboards.
Never worry about iDash being obsolete - with enough onboard memory for storing hundreds of webpages, firmware and webserver upgradeablility over Wi-Fi, as web standards evolve so will iDash.
With its Wi-Fi connectivity, total device compatibility, and more sensor inputs than any comparable product, iDash is the ultimate tuning tool you need to unleash the full potential of your engine.
14Point7 stands behind this product with a warranty that is twice as long as any competing product. With an unrivaled 60 day money back guarantee, you can buy with confidence and know that you are getting the absolute best.
Features:
 |
Wi-Fi b/g connectivity for simple and quick connections between iDash and your phone, tablet, or PC |
     
|
Compatible with your favorite hardware and OS |
   
|
Compatible with your favorite web browser |
  
|
Chose from 3 interfaces:
|
 |
Connect multiple devices simultaneously and mix different devices and browsers to create a custom virtual dashboard across multiple screens |
 |
Upload your own custom HTML and HTML5 webpages for a truly unique virtual dashboard |
 |
32 mb of onboard memory for storing up to 1.5 hours of data-logging |
 |
Built in RPM Pickup - 0[RPM] to 20000[RPM] |
 |
Shaft RPM Sensor input - monitor your transmission and wheel slippage, 0[RPM] to 10000[RPM] |
 |
Built in Dual Axis Accelerometer - measures both cornering and acceleration/deceleration G-forces |
 |
8x Exhaust Gas Temperature probe inputs, 0[F] to 2500[F], 0[C] to 1400[C] |
 |
Dual Boost/Vacuum sensor inputs, 0[PSI] to 44[PSI], -30[Hg] to 88[Hg] |
 |
Dual Intake Air Temperature sensor inputs, 0[F] to 300[F], 0[C] to 150[C] |
 |
Fuel Pressure sensor input, 0[PSI] to 150[PSI], 0[Hg] to 250[Hg] |
 |
Oil Pressure sensor input, 0[PSI] to 150[PSI], 0[Hg] to 250[Hg] |
 |
Fluid Temperature sensor input, 0[F] to 300[F], 0[C] to 150[C] |
 |
Dual 0-5 Volt inputs |
 |
A Two-year warranty, twice as long as any competing product |
 |
60 day money back guarantee |
Wideband O2 Option Features:
| iDash utilizes the Bosch LSU 4.9 Wideband O2 Sensor - a cost efficient Wideband O2 sensor providing 0.01 Lambda accuracy, fast response, and rated life of 100,000 km |
 |
Upto dual onboard Wideband O2 Controllers Compatible with all fuel types Ultra wide AFR/Lambda range, 0.68[Lambda] to 100[Lambda], 10[AFR] to 100[AFR] equivalent for gasoline |
 |
0.01 Lambda accuracy without the need for any calibration Although not required (or recommended), Free Air Calibration is supported |
 |
O2 Sensor Temperature Monitor Did you know that the most common cause of inaccuracies and premature O2 sensor failure is attributed to the O2 sensor temperature being improperly controlled? Only 14Point7 branded Wideband O2 Controllers are able to monitor O2 sensor temperature |
 |
Linear Output allows easy interfacing with gauges, fuel management systems, and data-loggers Linear Output: 0[v]@0.68[Lambda] linear to 5[v]@1.36[Lambda], 10[AFR] linear to 20[AFR] equivalent for gasoline |
 |
Our innovative Output Sequencer feature means our Wideband O2 Controllers to have the most accurate Linear Output on the market. You can be sure that any device connected to the Linear Output will receive the most accurate AFR/Lambda signal possible The Output Sequencer provides a dual level precision voltage signal to the Linear Output. This allows you to easily check that the AFR/Lambda seen by any device connected to the Linear Output is accurate, and if not, to generate a 2 point calibration to achieve perfect accuracy |
 |
Simulated Narrowband Output allows you to install a Wideband O2 Sensor in place of your Narrowband O2 sensor Switch point @ 1[Lambda], 14.7[AFR] equivalent for gasoline |
"Instantly transformed my cutting edge mobile device into a cutting edge engine analytical tool"
T. Williams, satisfied iDash customer
"iDash was the ultimate tool to unleash my engine's inner beast"
J. Carver, satisfied iDash customer
"Effortlessly displays everything I need to know about my engine on my iphone and Droid tablet at the same time"
A. Riley, satisfied iDash customer
"iDash help me win 4 of 5 best of show categories"
B. Lee, satisfied iDash customer
iDash Basic includes the following items:
- iDash unit (6x4x1 inches)
- Wireless router (2.5x1x0.5 inches, new router model)
- 4ft 4-conductor 18 AWG iDash power cable
- 2ft 2-conductor 20 AWG router power cable (connects to iDash for power)
- ethernet cable
- 1A replacement fuse
iDash Single Wideband O2 includes the following items:
- iDash unit (6x4x1 inches)
- 1x Wideband Controller module installed into iDash
- 1x LSU 4.9 Wideband O2 sensor
- 1x 8ft 6-conductor 18 AWG Wideband O2 sensor Cable
- 1x O2 bung
- Wireless router (2.5x1x0.5 inches, new router model)
- 4ft 4-conductor 18 AWG iDash power cable
- 2ft 2-conductor 20 AWG router power cable (connects to iDash for power)
- ethernet cable
- 1 Amp replacement fuse
- 10 Amp replacement fuse
iDash Dual Wideband O2 includes the following items:
- iDash unit (6x4x1 inches)
- 2x Wideband O2 controller modules installed into iDash
- 2x Bosch LSU 4.9 Wideband O2 sensor
- 2x 8ft 6-conductor 18 AWG Wideband O2 sensor Cable
- 2x O2 bung
- Wireless router (2.5x1x0.5 inches, new router model)
- 4ft 4-conductor 18 AWG iDash power cable
- 2ft 2-conductor 20 AWG router power cable (connects to iDash for power)
- 4ft ethernet cable
- 1 Amp replacement fuse
- 10A replacement fuse
iDash Compatible Products:
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Share This