14Point7

SLC DIY 2: Sigma Lambda Controller Do It Yourself 2

SLC DIY 2 is the DIY version of SLC Pure Plus 2.

SLC DIY 2 has all of the features of SLC Pure Plus 2 except; Internal Memory for datalog storage, warranty and machined backplate. The only assembly required is the construction of cables and mounting the circuit board into the case. Total assembly time is around 45 minutes. Once properly assembled SLC DIY 2 will function identically to SLC Pure Plus 2 with the exception of not having Internal Memory for datalog storage.

SLC DIY 2 Features

Has most features of SLC Pure Plus 2 at an super low price, visit the SLC Pure Plus 2 page for complete feature list
All components are pre-soldered
Soldering only required for making cables
Includes all parts, no additional parts required
Hardware is Calibrated and fully tested before shipping

Features that SLC DIY 2 does not have WRT to SLC Pure Plus 2

Pre-made cables
Internal Memory for datalog storage
Machined backplate,only effects aesthetics when looking at the back of the unit.
Warranty

Software and Documentation

Download documentation and software here

Items Included in Purchase

PCB with all components pre-soldered
Case + screws + faceplate
Lambda Cable components; 8ft, 6 conductor, 18 AWG, Lambda connector, Lambda connector pins, 6 position molex male female connector, molex connector pins
Power Cable components; 4ft, 4 conductor, 18 AWG, 4 position molex female connector, molex connector pins
Auxiliary 1 Cable components; 8ft, 8 conductor, 22 AWG, 8 position molex female connector, molex connector pins
Auxiliary 2 Cable, 8 ft,5 conductor, 20 AWG, solders directly to PCB
2x fuse holders
2x 250ma fuse (replacement included)
2x 5A fuse (replacement included)
3ft USB cable
Mild Steel O2 exhaust bung
Software CD

Shipping

Shipping and handling is $15-$20

Shipping is via the postal service there is no tracking #

SLC DIY 2 FAQ

Purchase (Available for purchase on April 10 2011)

SLC DIY 2 ($140) Bosch Lambda sensor not included
Bosch 17014 Lambda Sensor ($50) Compatible with all SLC Lambda controllers Normally priced @ $70, only $50 with any SLC order Max 1 sensor per SLC order
Digital AFR Gauge-52mm ($50) High quality aluminum housing 10[AFR] to 20[AFR] 0.1 AFR resolution Compatible with SLC and most other brands of Lambda Controllers Analog Input, 0[v] @ 10AFR linear to 5[v] @ 20 AFR
Exhaust Gas Temperature Probe ($50) 1/8" NPT male k type thermocouple, closed junction, ungrounded junction 0[C] to 1200[C] 6.5ft length
Manifold Absolute Pressure Sensor ($45) -14.5[PSI] to 43.5[PSI], absolute Includes nylon tubing, filter, 3 way tap
Fluid Temperature Sensor ($25) 1/8" NPT male
Air Intake Temperature Sensor ($50) -40[C] to 150[C] 3/8" NPT
Fuel Pressure Sensor ($45) 1/8" NPT male 0[PSI] to 145[PSI]
Oil Pressure Sensor ($40) 1/8" NPT male 0[PSI] to 145[PSI]
Auxiliary Sensor Pack ($225) EGT Probe MAP Sensor Fluid Temperature Sensor Air Intake Temperature Sensor Fuel Pressure Sensor Oil Pressure Sensor $255 value, only $225 with SLC Purchase
Check out additional accessories here