We only sell the JAW reader, you will have to supply the wiring and the Bosch Sensor.

There are 2 ways to assemble a complete wideband system; a cheap way and a more expensive way, depending on how you want to connect the Bosch sensor to JAW.

Regardless of the each way you will need the following:

1. JAW Reader

2. Bosch LSU Sensor:

worldimpex has the sensor for $60 USD

Autozone in the USA has the sensor for 50.99 USD

Amazon.com has the same sensor listed @ $44.39 USD with free shipping to the USA. It used to be $44.39 up until mid of July 2007, now it is $66, they might lower the price again to $44.39 so check with them first before you buy them elsewhere. 

3. Wires to connect the Bosch Sensor to the JAW.

The wires should be "multi-core" and rated for atleast 3 amps. You will need 6 wires for the plug and 2 more to supply Ground and Power to JAW. You can get the wires from your local electronics hobby store or from places like Home Depot, Rona, etc...

 

 

 

 

 

 

 

 

The Cheap way involves using the supplied female spade connectors to connect the Bosch sensor to JAW. For more information click here.

 

 

 

 

 

 

 

 

The expensive way involves buying the harness from a VW dealership, for more information click here.

Name	Site	VW Part #	Quantity	Price Each [USD]	Total [USD]
Housing	www.worldimpex.com	1J0-973-733	1	$4.59	$4.59
Terminals	www.worldimpex.com	000-979-133-A	3	$2.87	$8.51
Grommet	www.worldimpex.com	357-972-741-A	6	$0.29	$1.74
Total					$14.84